CountryView™ Clear Vinyl Technical Data

CountryView™ Vinyl - Improve Your View

CountryView™ Vinyl - Improve Your View

CountryView is the highest grade uncoated pressed clear vinyl product that comes in 54″ x 110″ (1371 x 2794 mm) sheets with a thickness of 20 mil.

CountryView is specifically designed for residential, commercial and architectural applications. It can be assembled by sewing or by welding.

IMAR CountryView Cleaner and Protective Polish are available to clean, maintain and extend the product’s life. Contact your distributor for a free sample to see how CountryView can improve your view.

General Information

SPECIFICATION EXPLANATION / RESULTS
1. Name of Fabric CountryView
2. Trademark Holder – list company name or registered trademark holder Strataglass, LLC

Construction

SPECIFICATION EXPLANATION / RESULTS
1. Chemical Base of Material PVC
2. Finish Type or Coating Pressed Clear Vinyl
3. Thickness 20 mil
4. Finished Widths (untrimmed) 54 x 110 inches (plus or minus 1 inch)
1371 x 2794 mm (plus or minus 25.4 mm)
5. Note We supply 54″ x 110″ untrimmed sheets.
For architectural use, we suggest 2″ four-sided trim-off for optimum use of clear image area.
6. Finished Weight/per sq. yd. Depends on thickness.

Aesthetics

SPECIFICATION EXPLANATION / RESULTS
1. Colors Available Clear

Durability

SPECIFICATION EXPLANATION / RESULTS
1. Life Expectancy – range of life expectancy in years 5 years, care & exposure dependent.
2. Hardness Shore A 90 (ASTM D 2240)
3. Tensile Strength 3943.7 (ASTM D882)
4. Tear Strength 3007.4 (ASTM D882)
5. Elongation 241.6% (ASTM D882)
6. QUV 2000 hrs (ASTM) G154-00a)
7. Xenon and Weatherometer NA
8. Luminous Transmittance 88.8% (ANSI Z26.1, test 2)
9. U.V. Filtering 10% UVA, 1% UVB, 1% UVC
10. U.V. Blocking 90% UVA, 99% UVB, 99% UVC
11. Haze ASTM D1003 0.59 < 0.9%
12. “W” Flex 30.000 counts (FLTM BN2-2)
13. Flame Resistance Self extinguishing (ANSI Z26.1, test 5.23)
Cal. 117 Sec. E / MVSS302
14. Cold Flex (state low temperatures and cite specific test method used) No cracks at < – 10°F (FLTM 50-5)
15. Low Temperature Brittleness < – 30°F
16. Dimensional Stability++ (MD) 100″-7/16″, (TD) 50″-3/16″

++ Note: In cold climate, the dimensional stability can be from 0 to ½ percent possible. Both directions in pressed film.

Support Materials Available

SPECIFICATION EXPLANATION / RESULTS
1. Fabrication / Technical Manual No
2. Specification Sheet / MSDS Sheet Available Yes
3. Warranty and Contact Information Available Yes

Please Note: Typical test results. Values considered to be nominal and do not constitute a warranty, specification or fitness for a particular purpose or application.